Rotax kit
- 4x EGT (K-type thermocouple, screw type M8 x 1)
- Active fuel pressure sensor and fittings for 1/4” fuel line
- Current transducer 30 A
Sensors
Cylinder head temperature sensors
- Temperature probe, VDO (0 to 150 °C / 0 to 300 °F)
- 1/8 – 27 NPT thread
- For Rotax engines
- Thermocouple (type J)
- 12 mm ring terminal
- For Jabiru engines
- Thermocouple adjustable bayonet (type J)
- bushing 3/8”-24, tip 2 1/2” x 3/16”
- For Lycoming engines
Exhaust gas temperature sensors
- Thermocouple (type K)
- M8x1 screw type
- For Rotax engines
- Thermocouple (type K)
- Hose clamp 3/4 – 1 3/4”
- For Jabiru engines
- Thermocouple (type K)
- Hose clamp 1/2 – 2”
- For Lycoming engines
Pressure sensors
- Active fuel pressure sensor (0 to 1 bar / 0 to 15 psi)
- 1/8 – 27 NPT thread
- For all engines
- Active oil pressure sensor (0 to 10 bar / 0 to 145 psi)
- 1/8 – 27 NPT thread
- For all engines
Temperature sensors
Oil/water temperature sensor
- Oil or water temperature probe, VDO (0 to 150 °C / 0 to 300 °F)
- 1/8 – 27 NPT thread
- For Rotax and Jabiru engines
- Oil temperature (100 to 150 °C)
- 5/8 – 18 UNF thread
- For Lycoming engines
- Outside air temperature (OAT) digital sensor.
Other
- Proximity sensor
- 12 to 24 V DC
- Fuel flow sensor FloScan 201A-6
- 0 to 113 liters/hour / 0 to 30 GPH
- For all engines
- For currents up to -/+30 A
Fuel pressure sensor fitting 8 mm
- Fuel pressure sensor fitting – 8 mm hose
- For Rotax 914 engine
Fuel pressure sensor fitting 6 mm
- Fuel pressure sensor fitting – 6 mm hose
- For Rotax 912 engine
Accessories
- CAN to Bluetooth interface
- Enables you to configure and upgrade any CAN based Kanardia device
- DC-DC Adjustable Step-up Power Converter Module
- Input voltage: 3 – 34 V
- Output voltage: 4 – 35 V
- Output Current: 2.5 A (max)
- Power supply cable for Kanardia products
- Standard length 1.0 m
- CAN cable with RJ45 connector on both sides
- CAN cable with RJ45 connector on one side, Binder (round 5 pole) on the other
- Double, triple and multiple T CAN cable – custom length
- Provides two or more connections for CAN units
- T junction – three RJ45 connectors
- Provides one additional connection for new CAN unit
- GPS antenna + standard length cable
- 0.6 m, 0.8 m, 1.2 m